1967 Abarth OT 1300 #137C/0041

All photography work is copyrighted by the author, please don't download and publish these pictures in the internet without my permission! 

Larger high quality pictures is available only for donators up on request! Vasileios Papaidis 2017 © All Rights Reserved

In 1958, the American Chrysler Corporation pursued an entry into the European motor manufacturing market by buying 15 per cent of the French Simca company's stock from Ford. At that time, however, the dominant shareholder remained Fiat of Turin, and their influence remained distinctively apparent in the engineering and design of Simca cars for several years into the early 1960s. However, in 1963 Chrysler increased its Simca stake to a controlling 64 per cent by purchasing stock from Fiat, subsequently extending that holding to 77 per cent.

Chrysler had no interest in any continuation of the previously successful Simca Abarth and Abarth Simca high-performance car collaboration, which came to a juddering halt. In Turin Carlo Abarth found himself left more or less high and dry, but the supply of basically Simca 1000 chassis floor pans, upon which the sleek and superfast Abarth Simca 1600s and 2000s had been based, left quite a number in stock, as yet unused.

The popular legend is that it was upon these unused Simca platforms that Abarth then founded his 1300cc class Gran Turismo design for 1965 – the OT 1300. Abarth's technical team under Mario Colucci had developed a boxed pressed-steel chassis structure on the modified Simca 1000 floor pan to which allindependent suspension was attached with componentry drawn from the Fiat 850 shelves. The Abarth OT 1300 then emerged, to race for the first time as a prototype in the September, 1965, Nurburgring 500-Kilometre classic.

The whole car was covered in a sleek fiber glass body that was penned Mario Colucci and fabricated at Sibona & Basano of Turin. Upfront was a large opening to feed air to a radiator which was then extracted out the top of the hood. Both the front and rear sections were hinged and provided ample access to the running gear.

Driver Klaus Steinmetz hammered the new Coupé home to a fine third-place finish overall and the OT 1300 was up and running into the record books, becoming one of the most successful – and also one of the most distinctive – models that Abarth & C ever produced. The OT 1300's rear-mounted all-Abarth engine was overhung – in best Carlo Abarth-approved style. It was a 4-cylinder unit with twin overhead camshaft cylinder head, using a block with cylinder bore and stroke dimensions of 86mm x 55.5mm to displace 1289cc.

With two valves per cylinder and a 10.5:1 compression ratio, the engine breathed through two twin-choke Weber 45DCOE9 carburettors. Ignition was by two plugs per cylinder, fired by single distributor. Dry-sump lubrication was adopted and the power unit produced a reliable 147bhp at 8,800rpm. This lusty engine, perfected by Abarth's power-unit specialist Luciano Fochi with five main-bearing crankshaft, drove via a five-speed and reverse Abarth transaxle.

Wheelbase length of the OT 1300 was nominally 2015mm, front track 1296mm and rear track 1340mm. It featured moulded glassfibre clamshell-style opening front and rear body sections moulded by Sibona & Basano in Turin, and this pert-nosed Coupé became a familiar sight dominating its class for three consecutive years. Production of the OT 1300 began on May 15 1966 and ended on March 30, 1966, by which time the minimum production number of 50 required by the FIA for homologation as a Gran Turismo model had (allegedly) been achieved.

The most distinctive single characteristic of the OT 1300 Coupé, apart from its huge International success within its class, was its adoption of the Periscopica air-cooling intake on the rear of the cabin roof. Casual onlookers would assume that the periscopelike intake fed intake air into the rear-mounted engine, but this is absolutely not the case. Instead, the water and oil-cooling pipe runs through the cockpit area heated-up the cabin to what was generally considered to be an unacceptable level for endurance racing, and the periscope intake merely blasted cold air down into the cabin to cool the driver himself...

From the OT 1300 Mario Colucci developed the OT 2000 Coupé using the 1946cc 4-cylinder power unit perfected by his colleague Luciano Fochi and with some 215bhp at 7,600rpm that largerengined model was capable of exceeding 165mph in a straight line. In fact all these Abarths with their sleek aerodynamic bodies and light weight really were exceedingly rapid by the standards of the time and within their respective capacity classes.

The engine was designed from the ground up, but was similar to the Simca 1.3-liter they had raced in previous years. It was built at

Corso Marche by Luciano Fochi who had already designed the 1.6 and 2.0-liter units. Hallmarks of the engine included five main bearings, twin overhead cams and twin choke Weber carburetors.

Between May 1965 and March 1966, over 50 examples of the OT 1300s were made to satisfy homologation requirements. It replaced the Abarth Simca 1300 but raced in the prototype class until homologated in May of 1966. During the season, the OT 1300 racked up 37 points towards the Constructor’s Championship.

In 1967, the design was updated starting with the chassis which was widened. Probably the most distinctive touch was the addition of a roof-mounted scoop which fed the carburetors fresh air. At the rear were many changes including larger Plexiglas rear window and a very small spoiler. For me was a great experience and I hope in the next future to show a driving experience with it.

Thanks to the kind owner mr.Carlo Steinhauslin for the consession of the car at pista di Pegusa and for the rare documents I share here.

Chassis #137C/0041

At the 1967 Le Mans, the 1300 OTs were the very last cars to complete their race, but won their class in 16th place overall. They were behind similarly powered Alpine A210 Renaults that had to be placed in the prototype category due to homologation requirements.

Overall both the series I and series II OT 1300s were very successful. They won the 1966 and 1967 Division 1 Grand Touring World Championship and the 1966, 67 and 68 Group 4 Italian Championship.

These rare documents shows the car at starting grid in pista di Pergusa and the most characteristic with No 94 when the car raced by Alfio Gambero (I) & Angelo Bonaccorsi (I) at 51th Targa Florio 1967 with not so successful result,but this was just the beginning..

Photo Gallery

List of participations, these are highlights 
not the full racing history of the car


We'd love to hear from you

  • White Facebook Icon
Find us on Facebook
1967 Abarth OT 1300 Targa Florio '67